The Profi TX from Multiplex is you savior. Jack Iafret "Keeper of the Nostalgia Rules" ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, December 24, 2002 9:02 AM Subject: [RCSE] Can the new generation of computer radios do this ?
> Hi Guys, > > I am wondering if there are any radio transmitters out there that > allows the user to program the mapping between the control slot > number and the control function. My old ( 10 years + ) JR computer > radios have got the following slot assignment : > > Slot 1: Throttle > Slot 2: Aileron > Slot 3: Elevator > Slot 4: Rudder > > As I am flying sailplanes, the throttle / gear controls are useless > to me but I do need the AUX1 control very often as most of my > sailplanes have seperate servo for each aileron. That means the > receivers I use must support no less than 6 channels ( Thro, Ail, > Elev, Rudd, Gear, AUX1 ) and this requirement has been restricting my > choice of receivers. > > What I would like to have is a radio transmitter that allows me to > swap the AUX1 and throttle control slot at the so that I can use a 4- > ch receiver in the following manner : > > Slot 1: AUX1 > Slot 2: Aileron > Slot 3: Elevator > Slot 4: Rudder > > Is this supported by the new generation of computer radio > transmitters ? > > Thanks in advance , > > Y C Lui > > > > > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
