I use Camie 300 and 373 for Styrofoam, pink and blue foam.  As long as you
mist it there's no problem.
Holds great.
You can lay it on if you are using EPP foam.
Also, Camie has a line specifically designed for foam.  It has a lace
pattern, so is fine if you are gluing foam to foam or fabric to foam, but
not good for foam that is to be covered with tape or standard covering.

Tom


T&G http://adesigner.com
32 Mount View Dr
Afton, VA  22920
phone 540 943-3356
fax  540 943-4178
  ----- Original Message -----
  From: Harley Michaelis
  To: Thomas Koszuta ; RCSE
  Cc: Bob Vixie
  Sent: Monday, January 12, 2004 3:40 PM
  Subject: Re: [RCSE] So what is the replacement for 3m77 ?


  A couple of us each picked up a case (12 cans) of the Camie 373 from
Winder Packaging in Greenville, SC, having heard it was a suitable
substitute. It was only $64.20 and there was no shipping charge. I've lost
the paper work, but a web search for Camie 373 will get you to Winder
Packaging and a phone #. The on line ordering setup has not been working
although it does take the information.

  When I noticed that acetone was an ingredient I sent an e-mail asking how
it might be used to be foam friendly. The recommendation was to first spray
on a light coat from 12" or so, let it cure and then apply more. The light
coat was said to act as a barrier to the acetone in the subsequent heavier
coat or coats. Bob Vixie, [EMAIL PROTECTED]  has done some extensive
experiments with it and feels it is suited to our purposes where foam is
involved. He puddled it on foam and said it did not eat it. You might check
with him and see if he would do a post to the RCSE about it so we are all
informed.
    ----- Original Message -----
    From: Thomas Koszuta
    To: RCSE
    Sent: Monday, January 12, 2004 12:14 PM
    Subject: [RCSE] So what is the replacement for 3m77 ?


        With the formulation change of 77 so that it will now eat foam, what
is the miracle substance we should all be using?

        Any experiences?

    Tom Koszuta
    Clarence Sailplane Society
    (Buffalo) NY

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to