I'm not so sure about "extensive," but I did spray it on some different kinds of foam.  Didn't do a thing.  I also sprayed a bit of 3M77 (new formula) on some blue foam.  That didn't seem to do anything either.  I'm here in Colorado (6500 ft and very dry), so that might have something to do with it.  It's probably dry when it hits the foam.  Not really, but things do dry fast here.
 
I just got done sticking some sheeting down over white beaded foam on the leading edge of a WindDancer with it.  Not a problem.
 
I have several cans of Camie 373 that I can sell if anyone is interested.  $6/can + shipping, and these are the big 16oz cans.
 
Bob
----- Original Message -----
Sent: Monday, January 12, 2004 1:40 PM
Subject: Re: [RCSE] So what is the replacement for 3m77 ?

A couple of us each picked up a case (12 cans) of the Camie 373 from Winder Packaging in Greenville, SC, having heard it was a suitable substitute. It was only $64.20 and there was no shipping charge. I've lost the paper work, but a web search for Camie 373 will get you to Winder Packaging and a phone #. The on line ordering setup has not been working although it does take the information.
 
When I noticed that acetone was an ingredient I sent an e-mail asking how it might be used to be foam friendly. The recommendation was to first spray on a light coat from 12" or so, let it cure and then apply more. The light coat was said to act as a barrier to the acetone in the subsequent heavier coat or coats. Bob Vixie, [EMAIL PROTECTED]  has done some extensive experiments with it and feels it is suited to our purposes where foam is involved. He puddled it on foam and said it did not eat it. You might check with him and see if he would do a post to the RCSE about it so we are all informed.
----- Original Message -----
To: RCSE
Sent: Monday, January 12, 2004 12:14 PM
Subject: [RCSE] So what is the replacement for 3m77 ?

    With the formulation change of 77 so that it will now eat foam, what is the miracle substance we should all be using? 
 
    Any experiences?
 
Tom Koszuta
Clarence Sailplane Society
(Buffalo) NY

Reply via email to