That's all good, but the only thing I would stress is to use a "good" hi-torque servo on the tow release. You should not skimp on the release. I've been doing this Aerotow stuff for a while and have seen
-----Original Message----- From: Brian Chan [mailto:[EMAIL PROTECTED] Sent: Friday, March 04, 2005 10:14 AM To: John Derstine; 'Albert E Wedworth' Cc: [email protected] Subject: [RCSE] What I have in my BIG glider..... All, I have been flying my EMS 5.3m Duo Discus with lowly HS-225 for about 5 years and other than a broken gear(plastic gear) , I have no problem with them. I use 4x 3000 nicad and lowly non-digital Hitec servos on the rudder and elevator. I ran elgith servos in all(2x Ail, 2x Spoilier(HS-81), 1x Rud, 1x Ele, 1x Retractable gear, 1x tow release/brake on wheel) plus the rx and the Skymelodies tx. Oh, and a volt-watch battery indicator. Brian -- Brian Chan, An Electric Airplane Junkie @ San Mateo.Ca.USA RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
