[RCSE] flap servos

[d. o. darnell]

I have used Airtronics 94141s at flap on many ships over the years with  
great success.  I have even replaced Volz micromaxs in one of my Heras and  
think the 141 worked better although.  The newer Volz servos are probably  
better.  The only problem with 141s that I ever encountered was an axle  
hogging out the case causing slop (after a LONG time)  but this is easily  
remedied with a new case replacement (cheap).

If you DO use digitals, use ALL digitals:  Mixing analog and digitals  
might not be a good idea, but you could probably get an argument to the  
contrary.  If you don't need thin servos, the 94141s are as good as any  
other servo available for flap, or any other surface for that matter.

If you want to buy some 94141s or any other Airtronics gear, Please check  
my website at
WWW.Dozone.com/AIRTRONICS .  I believe you'll find my prices are as good  
as any available.
D.O. Darnell
(Worlds Smallest Airtronics Dealer)

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.  Email sent from web based email such as Hotmail and AOL are generally NOT in text format