Have you used acid flux like Stay Clean flux? I had a darn time soldering clevises to steel wire push rods. No matter how hot I got the wire the solder just couldn't stick. The acid flux did the trick. Good luck.
Best regards, Al Battad - WH6VE AMA #506981 -----Original Message----- From: Mickey Sullivan [mailto:[EMAIL PROTECTED] Sent: Monday, July 25, 2005 11:21 AM To: [email protected] Subject: [RCSE] soldering problem I'm using silver bearing solder 96%tin/ 4% silver to solder 3/64" steel wire and a propane torch. The solder rolls off even after using flux. Any suggestions? Thanks, Mickey RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
