I contacted SMC and their response is copied below. Thanks ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "mfarzin" <[EMAIL PROTECTED]> Sent: Tuesday, February 11, 2003 2:40 PM Subject: Re: UPnP issue with 7004awbr
> > Thank you for contacting SMC NETWORKS Technical Services department. > > Currently there is no UPnP support for this model router. Unfortunately > there is no exact date if there will be an update to support this feature > but if we do have an upgrade it will be posted on our website. > > Regards, > > [EMAIL PROTECTED] > SMC Networks, Inc. > 800-SMC-4-YOU > http://www.smc.com/index.cfm?action=products_whats_new. ----- Original Message ----- From: "mfarzin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 08, 2003 8:24 PM Subject: Re: [SOCALWUG] SMC 7004AWBR > Thanks Scott. So, it means that I have to get a linksys router and my SMC > can not support it? > I will call SMC and will post their response. > > Thanks again > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, February 08, 2003 6:36 PM > Subject: RE: [SOCALWUG] SMC 7004AWBR > > > > I have found you need upnp to pass netmeeting through a router properly > > since it uses many ports the new linksys firmware has upnp > > > > > > Sincerely, > > Scott > > > > [EMAIL PROTECTED] > > www.LaWirelessWeb.com > > www.scottsmarineservices.com > > www.boat-parts.net > > www.boatparts.us > > www.mdrboatparts.com > > > > > > > > > > > > -----Original Message----- > > From: mfarzin [mailto:[EMAIL PROTECTED]] > > Sent: Saturday, February 08, 2003 3:53 PM > > To: [EMAIL PROTECTED] > > Subject: [SOCALWUG] SMC 7004AWBR > > > > > > to establish a video conferencing session thru my wireless network, I > > have > > tried Netmeeting and other video conferencing software but can not pass > > by > > my SMC 7004AWBR access point fire wall to my cable modem and to > > Internet. Is > > there any solution? Is this SMC limitation ? can I do it by using an > > access > > point from a different manufacturer. Your help and advise will be > > greatly > > appreciated. > > > > M. Farzin > > > > Thanks > > > > > > >
