Make sure you have a good frequency/channel plan for the building. Only channels 1,6,11 have no spectrum overlap. Try to space the Access Points so there is good phisical seperation between the Aps on the same channels.
I would not expect a problem using the same SSID, the big benefit is the possibility of roaming. Frank Keeney Wireless Antennas, Cables and Equipment: http://www.wlanparts.com IM: Yahoo: wlanparts, AIM: wlanparts, MSN: frank at pasadena.net VOIP: Skype: wlanparts, FWD: 289372 > -----Original Message----- > On Behalf Of Kuhl, Vince (DotComm) > > I was looking for some resources on wlan design. I have a 6 > story building > with approx 5 radios per floor. All radio's are in the same > SSID. The idea > was to provide redundancy for the users but most pc's only > get an acceptable > signal from one radio anyway. It seems as if this one large > SSID approach is > causing more of an interference problem than anything else. > Would it be > better to break the building up into separate SSID's? Any thoughts or > resources would be appreciated. > Thanks >
