socketcan-core  

Messages by Thread

• • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Robin Holt
  • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Wolfgang Grandegger
  • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Marc Kleine-Budde
  • RE: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. U Bhaskar-B22300
  • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Wolfgang Grandegger
  • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Robin Holt
  • Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. Wolfgang Grandegger
• [RFC 0/4] [flexcan] Add support for powerpc (freescale p1010) -V5 Robin Holt
  • [RFC 2/4] [flexcan] Add of_match to platform_device definition. Robin Holt
  • [RFC 3/4] [flexcan] Add support for FLEXCAN_DEBUG Robin Holt
  • [RFC 1/4] [flexcan] Abstract off read/write for big/little endian. Robin Holt
  • [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Robin Holt
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Marc Kleine-Budde
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Kumar Gala
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Robin Holt
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Kumar Gala
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Wolfgang Grandegger
  • Re: [RFC 4/4] [powerpc] Implement a p1010rdb clock source. Marc Kleine-Budde
  • Re: [RFC 0/4] [flexcan] Add support for powerpc (freescale p1010) -V5 Robin Holt
  • Re: [RFC 0/4] [flexcan] Add support for powerpc (freescale p1010) -V5 Robin Holt
• [RFC 0/4] [flexcan] Add support for powerpc (freescale p1010) -V4 Robin Holt
  • [RFC 2/4] [flexcan] Introduce a flexcan_clk set of functions. Robin Holt
  • Re: [RFC 2/4] [flexcan] Introduce a flexcan_clk set of functions. Marc Kleine-Budde
  • Re: [RFC 2/4] [flexcan] Introduce a flexcan_clk set of functions. Robin Holt
  • Re: [RFC 2/4] [flexcan] Introduce a flexcan_clk set of functions. Marc Kleine-Budde
  • Re: [RFC 2/4] [flexcan] Introduce a flexcan_clk set of functions. Robin Holt
  • [RFC 3/4] [flexcan] Add of_match to platform_device definition. Robin Holt
  • Re: [RFC 3/4] [flexcan] Add of_match to platform_device definition. Marc Kleine-Budde
  • [RFC 4/4] [flexcan] Add support for FLEXCAN_DEBUG Robin Holt
  • Re: [RFC 4/4] [flexcan] Add support for FLEXCAN_DEBUG Marc Kleine-Budde
  • Re: [RFC 4/4] [flexcan] Add support for FLEXCAN_DEBUG Robin Holt
  • [RFC 1/4] [flexcan] Abstract off read/write for big/little endian. Robin Holt
  • Re: [RFC 1/4] [flexcan] Abstract off read/write for big/little endian. Marc Kleine-Budde
• [PATCH 1/2] RFC: can: flexcan: re-add CAN_CTRLMODE_LOOPBACK handling Marc Kleine-Budde
  • [PATCH 2/2] RFC: can: flexcan: disable chip and clock in register_flexcandev Marc Kleine-Budde
• [PATCH] can: flexcan: fix IFF_ECHO problem, remove FLEXCAN_MCR_SRX_DIS Marc Kleine-Budde
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel. Justin P. Mattock
• [PATCH] can: remove useless defaults in Kconfig Kurt Van Dijck
  • Re: [PATCH] can: remove useless defaults in Kconfig David Miller
• Re: [PATCH][upstream] powerpc: Adding bindings for flexcan controller Wolfgang Grandegger
• test with unsubscribed email address Oliver Hartkopp
• [PATCH 13/37] Remove unneeded version.h includes from drivers/net/ Jesper Juhl
  • Re: [PATCH 13/37] Remove unneeded version.h includes from drivers/net/ David Miller
• Re: linux-next: Tree for June 23 (net/can & i/o) Mike Frysinger
  • Re: linux-next: Tree for June 23 (net/can & i/o) Stephen Rothwell
• [PATCH] mcp251x: Fix duplicate transmissions Ken Ballentine
• [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Mike Frysinger
  • [PATCH 2/2] can: bfin_can: auto-calculate accessor sizes Mike Frysinger
  • Re: [PATCH 2/2] can: bfin_can: auto-calculate accessor sizes Wolfgang Grandegger
  • Re: [PATCH 2/2] can: bfin_can: auto-calculate accessor sizes David Miller
  • Re: [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Wolfgang Grandegger
  • Re: [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Kurt Van Dijck
  • Re: [PATCH 1/2] can: bfin_can: simplify xmit id1 setup David Miller
  • [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Mike Frysinger
  • Re: [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Oliver Hartkopp
  • Re: [uclinux-dist-devel] [PATCH 1/2] can: bfin_can: simplify xmit id1 setup Mike Frysinger
  • [PATCH 2/2] can: bfin_can: auto-calculate accessor sizes Mike Frysinger
• [PATCH] MAINTAINERS: mark socketcan-core lists as subscribers-only Mike Frysinger
  • Re: [PATCH] MAINTAINERS: mark socketcan-core lists as subscribers-only Marc Kleine-Budde
  • Re: [PATCH] MAINTAINERS: mark socketcan-core lists as subscribers-only Mike Frysinger
  • Re: [PATCH] MAINTAINERS: mark socketcan-core lists as subscribers-only David Miller
  • Re: [PATCH] MAINTAINERS: mark socketcan-core lists as subscribers-only Jesper Juhl
• Re: [PATCH 03/11] net/can: use printk_ratelimited() instead of printk_ratelimit() David Miller
• Help getting a freescale P1010RDB talking to itself using can. Robin Holt
  • Re: Help getting a freescale P1010RDB talking to itself using can. Marc Kleine-Budde
  • Re: Help getting a freescale P1010RDB talking to itself using can. Wolfgang Grandegger
• Frame Loss during RX Bhupesh SHARMA
  • Re: Frame Loss during RX Oliver Hartkopp
  • RE: Frame Loss during RX Bhupesh SHARMA
  • RE: Frame Loss during RX Bhupesh SHARMA
  • Re: Frame Loss during RX Oliver Hartkopp
  • RE: Frame Loss during RX Bhupesh SHARMA
  • Re: Frame Loss during RX Wolfgang Grandegger
  • RE: Frame Loss during RX Bhupesh SHARMA
  • Re: Frame Loss during RX Wolfgang Grandegger
  • Re: Frame Loss during RX Wolfgang Grandegger
• [PATCH 00/11] can: at91_can: add support for AT91SAM9X5 series Marc Kleine-Budde
  • [PATCH 02/11] can: at91_can: fix comment about priv->tx_next Marc Kleine-Budde
  • [PATCH 03/11] can: at91_can: don't copy data to rx'ed RTR frames Marc Kleine-Budde
  • [PATCH 04/11] can: at91_can: let get_tx_* functions return unsigned int Marc Kleine-Budde
  • [PATCH 01/11] can: at91_can: don't align struct definitions Marc Kleine-Budde
  • [PATCH 10/11] can: at91_can: add support for the AT91SAM9X5 SOCs Marc Kleine-Budde
  • [PATCH 06/11] can: at91_can: rename AT91_MB_RX_MASK to AT91_IRQ_MB_RX Marc Kleine-Budde
  • [PATCH 09/11] can: at91_can: register mb0 sysfs entry only on at91sam9263 Marc Kleine-Budde
  • [PATCH 11/11] net/can: allow CAN_AT91 on AT91SAM9X5 Marc Kleine-Budde
  • [PATCH 07/11] can: at91_can: convert derived mailbox constants into functions Marc Kleine-Budde
  • [PATCH 05/11] can: at91_can: directly define AT91_MB_RX_LAST Marc Kleine-Budde
  • [PATCH 08/11] can: at91_can: add id_table and convert prime mailbox constats to functions Marc Kleine-Budde
  • Re: [PATCH 00/11] can: at91_can: add support for AT91SAM9X5 series David Miller
• [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put Julia Lawall
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put Julia Lawall
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put Julia Lawall
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put David Miller
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put Julia Lawall
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put Julia Lawall
  • Re: [PATCH 4/10] drivers/net/can/flexcan.c: add missing clk_put David Miller
• j1939 modules Kurt Van Dijck
  • Re: j1939 modules Felix Obenhuber
• Re: RFS: socketcan-utils Oliver Hartkopp
  • Re: Re: RFS: socketcan-utils Markus Becker
• outstanding patches for at91 Marc Kleine-Budde
  • Re: outstanding patches for at91 Wolfgang Grandegger
  • Re: outstanding patches for at91 Marc Kleine-Budde
  • Re: outstanding patches for at91 Wolfgang Grandegger
  • Re: outstanding patches for at91 Marc Kleine-Budde
• [PATCH] Introduce can_get_echo_skb_ni() when TX is not in interrupt Stefano Babic
  • Re: [PATCH] Introduce can_get_echo_skb_ni() when TX is not in interrupt Oliver Hartkopp
  • Re: [PATCH] Introduce can_get_echo_skb_ni() when TX is not in interrupt Stefano Babic
  • Re: [PATCH] Introduce can_get_echo_skb_ni() when TX is not in interrupt Marc Kleine-Budde
• [PATCH] Check the context in can_get_echo_skb() Stefano Babic
  • Re: [PATCH] Check the context in can_get_echo_skb() Oliver Hartkopp
  • Re: [PATCH] Check the context in can_get_echo_skb() Stefano Babic
• j1939: sysctl_check_dir failed on module insertion Felix Obenhuber
• [branches/j1939/can-utils PATCH] j1939: fix bug Kurt Van Dijck
  • Re: [branches/j1939/can-utils PATCH] j1939: fix bug Oliver Hartkopp
• Question for canutils Tomoya MORINAGA
  • Re: Question for canutils Marc Kleine-Budde
  • RE: Question for canutils Tomoya MORINAGA
  • Re: Question for canutils Marc Kleine-Budde
• [net-next-2.6 PATCH] can: rename can_try_module_get to can_get_proto Kurt Van Dijck
  • Re: [net-next-2.6 PATCH] can: rename can_try_module_get to can_get_proto Oliver Hartkopp
  • Re: [net-next-2.6 PATCH] can: rename can_try_module_get to can_get_proto David Miller
• [net-next-2.6 PATCH] can: make struct can_proto const Kurt Van Dijck
  • Re: [net-next-2.6 PATCH] can: make struct can_proto const Oliver Hartkopp
  • Re: [net-next-2.6 PATCH] can: make struct can_proto const David Miller
• [PATCH] can: fix SJA1000 dlc for RTR packets Kurt Van Dijck
  • Re: [PATCH] can: fix SJA1000 dlc for RTR packets Marc Kleine-Budde
  • Re: [PATCH] can: fix SJA1000 dlc for RTR packets David Miller
• [PATCH] add j1939 utils Kurt Van Dijck
  • Re: [PATCH] add j1939 utils Marc Kleine-Budde
  • Re: [PATCH] add j1939 utils Kurt Van Dijck
  • Re: [PATCH] add j1939 utils Marc Kleine-Budde
  • [PATCH v2] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v2] add j1939 utils Marc Kleine-Budde
  • Re: [PATCH v2] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v2] add j1939 utils Marc Kleine-Budde
  • Re: [PATCH v2] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v2] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v2] add j1939 utils Marc Kleine-Budde
  • Re: [PATCH] add j1939 utils Oliver Hartkopp
  • Re: [PATCH] add j1939 utils Kurt Van Dijck
  • Re: [PATCH] add j1939 utils Oliver Hartkopp
  • Re: [PATCH] add j1939 utils Kurt Van Dijck
  • Re: [PATCH] add j1939 utils Oliver Hartkopp
  • Using J1939 Kurt Van Dijck
  • Re: Using J1939 Kurt Van Dijck
  • Re: [PATCH] add j1939 utils - j1939 name Oliver Hartkopp
  • Re: [PATCH] add j1939 utils - j1939 name Kurt Van Dijck
  • [PATCH] j1939: kernel fixes Kurt Van Dijck
  • Re: [PATCH] j1939: kernel fixes Oliver Hartkopp
  • [PATCH] j1939 utils: introduce jdate Kurt Van Dijck
  • Re: [PATCH] j1939 utils: introduce jdate Marc Kleine-Budde
  • Re: [PATCH] j1939 utils: introduce jdate Kurt Van Dijck
  • Re: [PATCH] j1939 utils: introduce jdate Kurt Van Dijck
  • Re: [PATCH] j1939 utils: introduce jdate Marc Kleine-Budde
  • [PATCH] j1939 utils: introduce jdate Kurt Van Dijck
  • Re: [PATCH] add j1939 utils - j1939 name Oliver Hartkopp
  • Re: [PATCH] add j1939 utils - j1939 name Kurt Van Dijck
  • Re: [PATCH] add j1939 utils - j1939 name Oliver Hartkopp
  • [PATCH v3] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v3] add j1939 utils Marc Kleine-Budde
  • [PATCH v4] add j1939 utils Kurt Van Dijck
  • Re: [PATCH v3] add j1939 utils Oliver Hartkopp
  • Re: [PATCH v3] add j1939 utils Kurt Van Dijck
• [PATCH v4 0/5] CAN: add SAE J1939 protocol Kurt Van Dijck
  • [PATCH v4 1/5] can: extend sockaddr_can to include j1939 members Kurt Van Dijck
  • [PATCH v4 2/5] can: add rtnetlink support Kurt Van Dijck
  • Re: [PATCH v4 2/5] can: add rtnetlink support Oliver Hartkopp
  • Re: [PATCH v4 2/5] can: add rtnetlink support Kurt Van Dijck
  • [PATCH] can-j1939: allow j1939 to build of older kernel versions Kurt Van Dijck
  • Re: [PATCH] can-j1939: allow j1939 to build of older kernel versions Oliver Hartkopp
  • Re: [PATCH v4 2/5] can: add rtnetlink support Kurt Van Dijck
  • [PATCH v4 4/5] can-j1939: add documentation Kurt Van Dijck
  • [PATCH v4 5/5] iproute2: add can-j1939 support Kurt Van Dijck
  • Re: [PATCH v4 5/5] iproute2: add can-j1939 support Marc Kleine-Budde
  • Re: [PATCH v4 5/5] iproute2: add can-j1939 support Kurt Van Dijck
• [PATCH v4 1/1] can: add pruss CAN driver. Subhasish Ghosh
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Marc Kleine-Budde
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Wolfgang Grandegger
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Subhasish Ghosh
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Marc Kleine-Budde
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Subhasish Ghosh
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Wolfgang Grandegger
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Wolfgang Grandegger
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Subhasish Ghosh
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Alan Cox
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Subhasish Ghosh
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Marc Kleine-Budde
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Alan Cox
  • can: hardware vs. software filter Kurt Van Dijck
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Wolfgang Grandegger
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Kurt Van Dijck
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Arnd Bergmann
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Marc Kleine-Budde
  • Re: [PATCH v4 1/1] can: add pruss CAN driver. Oliver Hartkopp

• Earlier messages
• Later messages