Hello all, I'm pretty new on the list so please forgive me if my question is pointless.
We are using a B&R automation PC with a cc770 ISA card (sometimes with a i82527 mounted). In the past we used a self modified lincan driver but now we would like to change to socketCAN. Therefore I checked the svn source out and had the same issues as mentioned in the threads before. But then I just compiled the cc770 tree and I'm using the driver without any problem by loading with following parameter: modprobe cc770_isa irq=0xa port=0x384 indirect=1 The statement of Oliver that SocketCAN SVN is currently only used for the can-utils and some development for new PF_CAN based networking protocols is confusing me a bit now due the fact that I couldn't figure out which module to use from the native kernel (2.6.39-4). Maybe someone can tell me if cc770 is already native part in kernel > 2.6.39 and if so the module name and maybe how to configure. Thank You in advance. Regards, Wolfgang _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
