I can't believe it! I bought a new cable and now it works!! What's the probability of buying a faulty cable? Damm it, but now it works!! Thank you all for you help!!
2007/4/29, Stuart Henderson <[EMAIL PROTECTED]>:
On 2007/04/28 17:13, Jan Ceuleers wrote: > > Another point: I'm not familiar with monowall, but if it is Linux-based > and you can log into it, try issuing the following command: FreeBSD-based; actually, thinking about it - since m0n0wall prints to the console while booting, even if fastboot=on you'll still usually see some output if the cable is wired correctly (readable if the speed is correct, garbled otherwise - possible exception being if one side is set to 115200 and the other isn't). If it's possible to test with a multimeter, pin 2 at one side must connect to pin 3 at the other (and vice-versa).
-- Saúl -- "Some people say why, other just say, why not." ---------------------------------------------------------------- NUEVA WEB --> http://www.saghul.net/
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
