Got my first 5501 today and just starting to look at it! So far so
good. Quite a speedy bootup compared to the 45xx and even the
4801. I added the vr interface to our nanobsd flash, and it booted
up without issue.
Here is a dmesg using a RELENG_6 image.
Are there any bits and parts of what is in HEAD that need to be
manually merged back to make things work "well" ? It looks like the
watchdogd doesnt work with just a stock RELENG_6 image ?
---Mike
comBIOS ver. 1.31m 20070606 Copyright (C) 2000-2007 Soekris Engineering.
net5501
0512 Mbyte Memory CPU Geode LX 500 Mhz
Pri Mas CF300 LBA 999-16-63 503 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:20:4 1022 2094 0C031002 0006 0230 08 00 00 A0005000 00000000 15
0:20:5 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
1 FreeBSD
2 FreeBSD
Default: 1
/boot.config: -hConsoles: serial port
BIOS drive C: is disk0
BIOS 639kB/523264kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Wed May 9 10:12:03 EDT 2007)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x25e208 data=0x2d694+0x15e58
syms=[0x4+0x36c30+0x4+0x46c16]
/boot/kernel/if_vr.ko text=0x4130 data=0x224+0x4 syms=[0x4+0x920+0x4+0x8d7]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #89: Wed May 9 10:49:55 EDT 2007
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/nano45
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (499.90-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory = 536870912 (512 MB)
avail memory = 520265728 (496 MB)
K6-family MTRR support enabled (2 registers)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no
driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0004000-0xa00040ff irq 11 at device 6.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:00:24:c8:b2:54
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0004100-0xa00041ff irq 5 at device 7.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:00:24:c8:b2:55
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem
0xa0004200-0xa00042ff irq 9 at device 8.0 on pci0
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2: Ethernet address: 00:00:24:c8:b2:56
vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem
0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0
miibus3: <MII bus> on vr3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr3: Ethernet address: 00:00:24:c8:b2:57
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq
15 at device 20.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 20.5 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (19200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
Timecounter "TSC" frequency 499904583 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 491MB <CF300 Ver1.27> at ata0-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
/conf/default/etc
cp: utimes: /var/var: No such file or directory
cp: chown: /var/var: No such file or directory
cp: chmod: /var/var: No such file or directory
cp: chflags: /var/var: No such file or directory
umount: /conf/default/etc: not a file system root directory
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 40101 free (8109 frags, 3999 blocks, 3.4% fragmentation)
Mounting local file systems:.
Setting hostname: datawest-soekris-test.sentex.ca.
net.inet.tcp.blackhole: 0 -> 1
net.inet.udp.blackhole: 0 -> 1
vr0: link state changed to UP
DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 6
DHCPOFFER from 192.168.43.1
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 192.168.43.1
bound to 192.168.43.196 -- renewal in 129600 seconds.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.43.196 netmask 0xffffff00 broadcast 192.168.43.255
ether 00:00:24:c8:b2:54
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting pflog.
pflog0: promiscuous mode enabled
Jun 18 14:18:01 pflogd[479]: [priv]: msg PRIV_OPEN_LOG received
Enabling pf.
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [EMAIL PROTECTED]
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
