so i have the bracketless sata jury-rigged, and i built a freebsd on it. but how do i boot from it? i am using the same sata data cable and power source which worked on another machine to build the drive, so i think they're ok.
looking at the doc for the 4801, i tried all sorts of combos of boot 80 boot 80:1 boot 81 ... boot 90-F0 clue bat, please. randy --- Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 021 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:20:4 1022 2094 0C031002 0006 0230 08 00 00 A0005000 00000000 15 0:20:5 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. Intel UNDI, PXE-2.0 (build 082) Copyright (C) 1997,1998,1999 Intel Corporation VIA Rhine III Management Adapter v2.43 (2005 PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel PXE ROM. No Boot device available, enter monitor. comBIOS Monitor. Press ? for help. > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
