On 2007/06/29 18:56, Bob Camp wrote: > The connector on both the net550x and on the back of your computer is > a male connector. You need a female to female cable to connect the > two. Since you are going same to same it needs to be a cross over > cable. Pin 5 goes to pin 5. Pin 2 goes to pin 3 on the other end.
Some boot loaders like to have more than just those 3 wired up. If you just want a lead for one box this is probably overkill, but for the toolbag I like http://www.ossmann.com/5-in-1.html (in my case adapted for cisco pinouts so I can use the same adapters to plug PCs into terminal servers, but ymmv) _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
