Correct .... it's still open / .... I haven't found a solution yet ervin
On 21/08/07, Tom Mazzotta <[EMAIL PROTECTED]> wrote: > About 10 days ago, I saw a couple of postings from EV & Martin Johnson > regarding a reboot problem with the 5501. Well I recieved a new 5501 today, > and I seem to be having the same problem. I'm booting off a 2.5" Fujitsu > drive w/ FreeBSD 6.2 (previously installed using a 4801). System boots fine > on power on, however, after issuing a reboot command in FreeBSD, the reboot > gets as far as displaying the amount of installed memory and processor type, > then just hangs! > > I'm haven't installed any CF. I tried configuring the HD as Primary/Master w/ > FLASH=Secondary as well as the HD jumpered for Primary/Slave w/ > FLASH=Primary. Same problems w/ rebooting in either configuration. > > I don't recall seeing a resolution to this issue via the list server. Does > anyone know how to get around the problem? > > -tm > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- mvh/best regards ervin _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
