On 21/08/2007, at 11.23, ervin wrote: > Correct .... it's still open / .... I haven't found a solution yet > ervin > > On 21/08/07, Tom Mazzotta <[EMAIL PROTECTED]> wrote: >> About 10 days ago, I saw a couple of postings from EV & Martin >> Johnson regarding a reboot problem with the 5501. Well I recieved >> a new 5501 today, and I seem to be having the same problem. I'm >> booting off a 2.5" Fujitsu drive w/ FreeBSD 6.2 (previously >> installed using a 4801). System boots fine on power on, however, >> after issuing a reboot command in FreeBSD, the reboot gets as far >> as displaying the amount of installed memory and processor type, >> then just hangs! >> >> I'm haven't installed any CF. I tried configuring the HD as >> Primary/Master w/ FLASH=Secondary as well as the HD jumpered for >> Primary/Slave w/ FLASH=Primary. Same problems w/ rebooting in >> either configuration. >> >> I don't recall seeing a resolution to this issue via the list >> server. Does anyone know how to get around the >> problem? Me neither
I decided to put my 5501 into production at home and hooked the console up to another server, so I can send the +++reset to make it reset and find the disk when I need to reboot (also connected it to an APC powerbar so I can powercycle as last resort) I would REEEEEALLLLLLLY like a short message from Soekris.com saying "We know this, and we are working on it" - but I dont remember seeing this anywhere? Best regards Henrik A: Because it breaks the conversation Q: Why is top-posting bad? -- Henrik Lund Kramshøj, Follower of the Great Way of Unix [EMAIL PROTECTED], +45 2026 6000 cand.scient CISSP CEH http://www.security6.net - IPv6, sikkerhed, netværk http://e-learning.security6.net - gratis kursusmateriale _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
