Martin Johnson wrote: > > On 8 Sep 2007, at 04:25, Nithin Kumar Dara wrote: > >> Hello, >> >> Iam new to Soekris. I want to install voyage into net4826. I am trying >> PXE boot. I power it using POE. When i connect the box to my PC running >> ubuntu feisty fawn using a null modem. My PC has only one serial port >> >> when i run setserial -g /dev/ttyS* the output is as following. >> >> /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 >> /dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3 >> /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4 >> /dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3 >> >> So i have configured minicom to connect to /dev/ttyS0 and baudrate >> 19200. But there is nothing i could notice on minicom. >> >> Could some throw light on this...where i could be doing mistake??? > > Are you sure you have a Null Modem cable? If it is a null modem > cable, then the transmit and receive data pins will be swapped over, > so pin 2 goes to pin 3 and pin 3 goes to pin 2. > http://www.beyondlogic.org/serial/serial.htm
Thanks for the link. I have used different null modem and it starts showing on minicom. Might be the first one is a wrong one. > > You may also want to switch off handshaking in Minicom > > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
