Hello all, This is my CF info from comBios:
---- Pri Mas SanDisk SDCFB-2048 LBA Xlt 992-64-63 2001 Mbyte --- After I partitionize the CF, I got following message: ------ pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to PIO mode 4 wd0:(pciide0:0:0): using PIO mode 4 wd0a: device timeout writing fsbn 96 of 96-0 (wd0 bn 159; cn 0 tn 2 sn 33), retrying wd0: soft error (corrected) ------- Then the installation continues and succeed: ---- Making all device nodes...done... ....blah,blah... CONTRATULATIONS!Your OpenBSD install has been successfully completed! ..... reset the machine and boot from the disk ----- Then I typed reboot at prompt, it reboot and hangs here: ------- boot> booting hd0a:/bsd:5567348+871228 [52+283664+263996]=0x6a9ba4 entry point at 0x200120 --------- does this mean that the bootloader boot OpenBSD from address 0x200120 and could not find the boot partition? do I have a faulty CF because of "pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20"? Thanks
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
