Try a hard reset. There is a known problem w/ the 5501 where the boot device is not recognized on reboot. Soekris says they are working on a BIOS update to address this issue.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 27, 2007 7:43 AM To: [email protected] Subject: [Soekris] [net5501] no signal after reboot Hi, After installing/rebooting OpenBSD on my net5501, i dont get signal trough the com0 port. When the box boot, i get a countdown for the OS boot and when it comes to 1, i dont get much signal... For the moment, i cant do any other tests since i am not at my home but since i got it in mind i was wondering if anyone have met the same problem... At the end of OpenBSD installation i told it to use com0 at 9600 bauds rate. Maybe it is a rate issue ? (i couldnt test it either, i was too much in hurry) Thanks in advance for any feedback, squale _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
