I was referring to repowering the box OR using a bent paper clip to push the reset switch. I you have already tried these procedures, You may need the advice of another list member with more OpenBSD experience.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 27, 2007 8:29 AM To: [email protected] Subject: Re: [Soekris] [net5501] no signal after reboot Le Jeu 27 septembre 2007 14:07, Tom Mazzotta a écrit : > Try a hard reset. There is a known problem w/ the 5501 where the boot > device is not recognized on reboot. Soekris says they are working on a BIOS > update to address this issue. Sorry for my bad english. With "hard reset", do you mean to "turn it off and on again" (tm) ? If so, it doesnt change anything :/ if you meant something else like reseting the box to manufacture default, i'll call it plan B ;-) _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
