you may find this helpful -> http://www.ultradesic.com/?section=52
On 02/10/2007, Bruce L. Harris II <[EMAIL PROTECTED]> wrote: > > > > > I was excited to receive my 5501 on Friday and planned to have a great > weekend geeking out setting it up to be a home DMZ server. However, I wound > up spending most the weekend trying to get an OS installed on it. I don't > give up easily. A positive thing, I learned a lot about PXE booting. Now > onto my question. > > > > A have a 5501 (current BIOS) with a 8GB Optima Pro UDMA CF Ultra High Speed > 266X > > > > I was able to start the install of Debian 4.1 and Ubuntu (6.0.1 and 7.04 > server) via PXE and netboot, but it would error out during the base install > process step. It would stop at various areas, most often on the extraction > part (~60%). I tried this about 10+ times with both standard disk and LVM > layouts. What am I doing wrong? > > > > If there is a better way to get this installed I would be open to any > suggestions. I would prefer to use Debian ports since I am most comfortable > using them. > > > > I have plenty of other computing equipment and VMware if needed. Any > suggestions? > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > > -- mvh/best regards ervin _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
