In message <[EMAIL PROTECTED]>, Mike Tancsa writes: >At 03:41 PM 10/5/2007, Poul-Henning Kamp wrote: >>In message <[EMAIL PROTECTED]>, Mike Tancsa writes: >> >> >The only mystery remaining is that FreeBSD 6.x sees this flash as >> >ad1, but FreeBSD current sees it as ad0. >> >>Have you by any chance lost the ATA_STATIC_ID option in your -current >>kernel ? > >Yikes, thats it! That makes sense why the difference between stable >and current. But why does the soekris see a flash sometimes as a >slave and sometimes as primary ?
Ideally it would be controlled by the bios-settings, but some CF cards will only sample the master/slave pin on power-on and not on resets, and they tend to be either always master or slave, depending on the state of that pin at power-on. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
