Resolved IDE HD reboot problems for me on my Net5501s (OpenBSD4.1) - thanks! :
wd0 at pciide0 channel 0 drive 0: <HTE721010G9AT00> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd1 at pciide0 channel 0 drive 1: <CF CARD 4GB> wd1: 1-sector PIO, LBA, 3871MB, 7928928 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 One curiousity. On another 5501 I have, but with a different type of 4Gb CF to above, it was not detected post upgrade: Boot at 1.32: Pri Mas HTE721010G9AT00 LBA Xlt 1024-255-63 97 Gbyte Pri Sla LEXAR ATA FLASH LBA Xlt 994-128-63 4009 Mbyte First reboot at 1.32h: Pri Mas HTE721010G9AT00 LBA Xlt 1024-255-63 97 Gbyte Pri Sla @AF@ Then gets stuck. Subsequently, reboot works fine but Pri Slave is simply not listed. Not a big deal for me as the CF cards are coming out, but thought it might be worth mentioning. All the best. Soren Kristensen wrote: > > Hi Everybody, > I just posted a net5501 BIOS update with: > comBIOS vers 1.32h > > * fixed IDE DMA enable issue on net5501 > * fixed soft reboot issue on net5501 > * change initial clear screen to scroll lines > > There might still be issues with Ultra-DMA detect/setting, I would be > happy to get a few success/failure reports, just email me directly. > > Also, I'm still investigating how 40/80 wire cable reporting should be > done.... > > > Best Regards, > > > Soren Kristensen > > CEO & Chief Engineer > Soekris Engineering, Inc. > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > > -- View this message in context: http://www.nabble.com/net5501-BIOS-Update-tf4565062.html#a13041692 Sent from the Soekris - Technical mailing list archive at Nabble.com. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
