Hi Brian I took the liberty of "borrowing" you mail and put it on the Soekris Wiki:
http://wiki.soekris.info/Pxelinux_hangs_if_serial_not_connected Hope you don't mind :) On Nov 15, 2007 7:29 PM, Brian Candler <[EMAIL PROTECTED]> wrote: > On Thu, Nov 15, 2007 at 12:17:39PM -0500, Bob Keyes wrote: > > I hope that you are OK with me taking your post (with attribution, of > > course) and putting it on our internal Wiki here at the Harvard CitySense > > project. > > No problem. I wrote it while I was debugging the problem, so it might make > sense to reorganise it so the solution is first, followed by the analysis > for anyone who's interested. > > I still can't think of a good reason why outputting via the BIOS int10h > would stop after a number of characters (for both pxelinux and grub), and > why sticking a signal on the RD line would make it start again. Possibly an > interrupt is getting lost somewhere. At least it's entirely repeatable. > > Regards, > > Brian. > > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- Kind regards René Luckow _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
