Hello all,
I just received 2 5501-60 :-)
I'm having some problem with a 4G CF card,
when booting, the machine hangs for like 8-10 seconds after the memory test,
then displays "Pri Mas LBA Xlt
997-128-63 4022 Mbyte"
and continues to the automatic boot count down.
When booting via OpenBSD's pxeboot, the bootloader hangs while probing hd0 :
probing: pc0 com0 com1 pci pxe![2.1] mem[639K 255M a20=on]
disk: hd0+*
>From the dmesg, it seems like the kernel doesn't detect the CF card.
I've tested the CF card in 2 identical boxes, same thing.
I've got a 2G card and it seem to work fine, no hang at all and openbsd sees it.
Do I need to do something to get it to work, or is it supposed to work
out of the box?
My guess is that I got a defective CF card, but I'm asking just in case...
The CF card is a "adata 4GB 266x" (yea right 266x...)
Here's the relevant info from the console:
-----8<------8<------
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy [2J
comBIOS ver. 1.32 20070606 Copyright (C) 2000-2007 Soekris Engineering.
net5501
CPU Geode LX 434 Mhz 0000
Mbyte Memory00160032004800640080009601120128014401600176019202080224024002560256
<hangs here for like 10 secs>
Pri Mas LBA Xlt 997-128-63 4022 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:20:4 1022 2094 0C031002 0006 0230 08 00 00 A0005000 00000000 15
0:20:5 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15
Seconds to automatic boot. Press Ctrl-P for entering Monitor. 5 4 3 2 1
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997,1998,1999 Intel Corporation
VIA Rhine III Management Adapter v2.43 (2005/12/15)
CLIENT MAC ADDR: 00 00 24 C9 32 6C.
DHCP.| | / / - - \ \ | | / / - - \ \ | | / / - - \ \ | | / / - - \ \ |
| / / - - \ \ | | / / - - \ \ | | / / - - \ \
CLIENT IP:
192.168.1.97 MASK: 255.255.255.0 DHCP IP: 192.168.1.1
GATEWAY IP: 192.168.1.1
TFTP.
TFTP./ /
probing: pc0 com0 com1
pci pxe![2.1] mem[639K 255M a20=on]
disk: hd0+* <hangs here again for a couple of seconds>
net: mac 00:00:24:c9:32:6c, ip 192.168.1.97, server 192.168.1.10
>> OpenBSD/i386 PXEBOOT 2.02
switching console to com0
>> OpenBSD/i386 PXEBOOT 2.02
com0: changing speed to 19200 baud in 5 seconds, change your terminal to match!
com0: 19200 baud
boot> bsd.rd
booting tftp:bsd.rd:
entry point at 0x200120ªÿ
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.2-current (RAMDISK_CD) #547: Sat Nov 17 23:10:52 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 434 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 268005376 (255MB)
avail mem = 253100032 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/70/06, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x30
"AMD Geode LX Crypto" rev 0x00 at pci0 dev 1 function 2 not configured
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:c9:32:6c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:c9:32:6d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:c9:32:6e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:c9:32:6f
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0,
32-bit 3579545Hz timer
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives) <<<<<< ?
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 20 function 4 "AMD CS5536 USB" rev 0x02: irq 15,
version 1.0, legacy support
ehci0 at pci0 dev 20 function 5 "AMD CS5536 USB" rev 0x02: irq 15
ehci0: pre-2.0 USB rev
isa0 at glxpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask e5c5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
----8<------8<------
Thanks
--
Jean
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
