Thanks for the fast reply :) when set as secondary, the CF card is detected right away and openbsd sees it.
# dmesg | grep ^wd wd0 at pciide0 channel 0 drive 1: <> wd0: 1-sector PIO, LBA, 3927MB, 8043840 sectors wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 # Thanks! -- Jean On Nov 22, 2007 4:56 AM, Wim Vandeputte - Mailinglists only <[EMAIL PROTECTED]> wrote: > > Hey, > > try setting > > set flash secondary > > in the > bios > > some flash only works as slave, not master > > > On Wed, Nov 21, 2007 at 08:36:39PM -0500, Jean Raby wrote: > > Hello all, > > > > I just received 2 5501-60 :-) > > > > I'm having some problem with a 4G CF card, > > when booting, the machine hangs for like 8-10 seconds after the memory test, > > then displays "Pri Mas LBA Xlt > > 997-128-63 4022 Mbyte" > > and continues to the automatic boot count down. > > > > When booting via OpenBSD's pxeboot, the bootloader hangs while probing hd0 > > : > > probing: pc0 com0 com1 pci pxe![2.1] mem[639K 255M a20=on] > > disk: hd0+* > > > > >From the dmesg, it seems like the kernel doesn't detect the CF card. > > > > I've tested the CF card in 2 identical boxes, same thing. > > I've got a 2G card and it seem to work fine, no hang at all and openbsd > > sees it. > > > > Do I need to do something to get it to work, or is it supposed to work > > out of the box? > > My guess is that I got a defective CF card, but I'm asking just in case... > > > > The CF card is a "adata 4GB 266x" (yea right 266x...) > > > > Here's the relevant info from the console: > > > > -----8<------8<------ > > POST: 012345689bcefghips1234ajklnopqr,,,tvwxy [2J > > comBIOS ver. 1.32 20070606 Copyright (C) 2000-2007 Soekris Engineering. > > > > net5501 > > > > CPU Geode LX 434 Mhz 0000 > > Mbyte > > Memory00160032004800640080009601120128014401600176019202080224024002560256 > > <hangs here for like 10 secs> > > Pri Mas LBA Xlt 997-128-63 4022 Mbyte > > > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > > ------------------------------------------------------------------- > > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > > 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 > > 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 > > 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 > > 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 > > 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 > > 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 > > 0:20:4 1022 2094 0C031002 0006 0230 08 00 00 A0005000 00000000 15 > > 0:20:5 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 > > > > Seconds to automatic boot. Press Ctrl-P for entering Monitor. 5 4 3 2 1 > > > > Intel UNDI, PXE-2.0 (build 082) > > Copyright (C) 1997,1998,1999 Intel Corporation > > VIA Rhine III Management Adapter v2.43 (2005/12/15) > > > > CLIENT MAC ADDR: 00 00 24 C9 32 6C. > > DHCP.| | / / - - \ \ | | / / - - \ \ | | / / - - \ \ | | / / - - \ \ | > > | / / - - \ \ | | / / - - \ \ | | / / - - \ \ > > CLIENT IP: > > 192.168.1.97 MASK: 255.255.255.0 DHCP IP: 192.168.1.1 > > GATEWAY IP: 192.168.1.1 > > > > TFTP. > > TFTP./ / > > > > probing: pc0 com0 com1 > > pci pxe![2.1] mem[639K 255M a20=on] > > disk: hd0+* <hangs here again for a couple of seconds> > > net: mac 00:00:24:c9:32:6c, ip 192.168.1.97, server 192.168.1.10 > > >> OpenBSD/i386 PXEBOOT 2.02 > > switching console to com0 > > >> OpenBSD/i386 PXEBOOT 2.02 > > com0: changing speed to 19200 baud in 5 seconds, change your terminal to > > match! > > > > com0: 19200 baud > > boot> bsd.rd > > booting tftp:bsd.rd: > > entry point at 0x200120ªÿ > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > Copyright (c) 1995-2007 OpenBSD. All rights reserved. > > http://www.OpenBSD.org > > > > OpenBSD 4.2-current (RAMDISK_CD) #547: Sat Nov 17 23:10:52 MST 2007 > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > > cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" > > 586-class) 434 MHz > > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX > > real mem = 268005376 (255MB) > > avail mem = 253100032 (241MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 20/70/06, BIOS32 rev. 0 @ 0xfac40 > > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 > > pcibios0: pcibios_get_intr_routing - function not supported > > pcibios0: PCI IRQ Routing information unavailable. > > pcibios0: PCI bus #0 is the last bus > > bios0: ROM list: 0xc8000/0xa800 > > cpu0 at mainbus0 > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x30 > > "AMD Geode LX Crypto" rev 0x00 at pci0 dev 1 function 2 not configured > > vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, > > address 00:00:24:c9:32:6c > > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > > 0x004063, model 0x0034 > > vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, > > address 00:00:24:c9:32:6d > > ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > > 0x004063, model 0x0034 > > vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, > > address 00:00:24:c9:32:6e > > ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > > 0x004063, model 0x0034 > > vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, > > address 00:00:24:c9:32:6f > > ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > > 0x004063, model 0x0034 > > glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, > > 32-bit 3579545Hz timer > > pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, > > channel 0 wired to compatibility, channel 1 wired to compatibility > > pciide0: channel 0 disabled (no drives) <<<<<< ? > > pciide0: channel 1 ignored (disabled) > > ohci0 at pci0 dev 20 function 4 "AMD CS5536 USB" rev 0x02: irq 15, > > version 1.0, legacy support > > ehci0 at pci0 dev 20 function 5 "AMD CS5536 USB" rev 0x02: irq 15 > > ehci0: pre-2.0 USB rev > > isa0 at glxpcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pccom0: console > > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 "AMD OHCI root hub" rev 1.00/1.00 addr 1 > > biomask e5c5 netmask ffe5 ttymask ffe7 > > rd0: fixed, 3800 blocks > > > > > > ----8<------8<------ > > > > > > Thanks > > > > -- > > Jean > > _______________________________________________ > > Soekris-tech mailing list > > [email protected] > > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
