Thanks for your response. that link was already in my bookmarks :)
I need to install another new small linux using the AMD Elan subarch to
be able to compile this code and run it.
I was not able to find any documentation about the I/O ports of this
board (nothing on soekris website, nothing on AMD website...)
Did you find something interesting ?
Thanks for your help.
Cheers,
Serge
Brian Candler a écrit :
On Sat, Feb 23, 2008 at 02:26:00PM +0100, Serge Dewailly wrote:
I have bought a soekris board for various personal projects.
I have successfully installed a debian etch, running a custom smaller
2.6.18-6 kernel (with debian patches).
I can't play with the error led and I/O port. I've found threads
speaking about kernel patches, but can't find how apply those...
I've found a driver for 4501 and 4801 on this site, but I can't compile
it since I've built my kernel in AMD Elan sub architecture. If I build
it from my computer (running debian too), I'm not able to then insert
the module in my soekris environment (bad module format...).
Does anyone find a solution to drive the error led and I/O port ?
A simple userland program exists which can control them. Needs no kernel
support, but must run as root.
Here's the source:
http://lists.soekris.com/pipermail/soekris-tech/2003-February/001954.html
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
