Hi, Many thanks for your advices :) I've built a kernel, using an AMD Elan subarch, just to try... I've bought my soekris less than two weeks ago... I've built a kernel like that to see if there was optimization in linux kernel.
I will compile a new kernel in a x86 subarch, you are right, it will make me easier compile kernel module, or userland code ;) Best regards, Serge. Brian Candler a écrit : > On Tue, Feb 26, 2008 at 01:41:52PM +0100, Serge Dewailly wrote: > >> I'am a little bit confused with the used of vmware in a subarch like amd >> elan... >> > > I really don't understand the problem: > > - The net4501 is just an x86 PC. It runs standard x86 code. > > - You can boot vmware using the same image that you use to boot the net4501. > > - You can build the gpio-controlling binary on *any* x86 platform. > > If you are building kernel modules which need to be optimised for some > particular quirk or extra instruction available on the SC520 CPU then maybe > I'd understand, but you really don't need to be doing this. > > I run OpenWrt on Soekris. I just build it for x86. > > Regards, > > Brian. > > > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
