John Cox skrev: > Hi all > > I now know why my SATA didn't work. U40 (a small chip near the SATA > bridge) was misplaced by 1 pin. Moving it back to its correct position > on the board fixed the problem. (I can happily have CF primary and SATA > secondary.) > > U22 which I'm guessing is the COM2 driver chip was also misplaced by a > pin. I had this cut out as we had no safe way of desoldering it, I have > no particular need for COM2 and it seemed unsafe to leave it in circuit > as it was. > > I have a picture of the chips before this was done which clearly shows > the problem & I will send it to whoever wants it but at 139k I didn't > think the list would appreciate it. These functions were clearly > untested as they can never have worked - Soekris needs to improve its > testing before dispatch. Can I claim some sort of refund? (say the cost > of postage x2 from the UK to Soekris which is what it would have cost > them if I'd returned it for repair) >
Its good that you share this kind of information, but perhaps your last question is best sent directly to soekris? [EMAIL PROTECTED] or even [EMAIL PROTECTED] Regards, Pontus. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
