Hi Community, My Hardware:
Board: net5501 - 500 MHz - 512 MB RAM - BIOS 1.33 HDD: IBM 2,5" - IC25N030ATCS04-0 - 29302 Mbyte i have a little trouble with my net5501. I want to install IPCop via PXE with TFTPD32. The following Settings to TFTPD32 were set: http://www.nabble.com/file/p16031312/TFTPD32_001_Settings.png DHCP as follows: http://www.nabble.com/file/p16031312/TFTPD32_002_DHCP.png http://www.snapdrive.net/files/114283/Soekris/PXE.wmv Video from net5501 boot Please see the Video what is happened after starting PXE-Boot. DHCP is well done but after the initial IPCop-Screen should be appearing only 15 Characters are shown scrolling down. Reading the screen is horrible. Which settings are wrong or what settings i have to set (or forget)? I test the TFTPD32 with my Laptop and all is fine (Display and starting the IPCop installation). I downgraded the BIOS from 1.33 to 1.32i but the same effect. Anyway i upgrade to 1.33 . Thanx for help RipeMD -- View this message in context: http://www.nabble.com/PXE-Boot-Problem-tp16031312p16031312.html Sent from the Soekris - Technical mailing list archive at Nabble.com. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
