At 03:04 AM 3/23/2008, Mike Kelly wrote:
># usbdevs -v
>Controller /dev/usb0:
>addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
>AMD(0x0000), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
>Controller /dev/usb1:
>addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
>AMD(0x0000), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
Even if you dont have a driver for it, it should attach as a ugen
device. Perhaps the connector is busted :(
---Mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
