</snip> > At 08:21 PM 3/22/2008, Mike Kelly wrote: > > >Is there any trick to getting this to work, or could I have > a bad board? > > Everything else on the board appears to work properly. > > Havent tried the 5501s on LINUX, but I do know they work under > FreeBSD. If you can, try it as it should work. We have a fair > number in the field that have apc upses hooked up via USB and they > work just fine > </snip>
A-OK over here.. net5501 S/N 158352 FreeBSD 6.2-Release #8: usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), AMD(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered Controller /dev/usb1: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), AMD(0x0000), rev 1.00 port 1 addr 2: high speed, power 200 mA, config 1, U3 Cruzer Micro(0x5406), SanDisk Corporation(0x0781), rev 0.10 port 2 powered port 3 powered port 4 powered Also just shipped 2 with later S/Ns to my customers that stress tested just fine with various FTDI USB devices that we use here, no problems. HTH G. F. Boyd Atlanta, USA _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
