I have a Soekris NET4526 board with two wireless (mini-pci) cards running a stripped down version of RedHat Linux. The software that I am running was written by another company so I am not terribly intimate with their software. I will tell you that it is configured to operate as a router.
My problem is that the board and software works fine when I have either of the two wireless cards installed in the Soekris board by themselves, but as soon as I install the other card such that both are installed simultaneously, I can't get either of them to work. What I mean by this is that the "Signal Level" reported by iwconfig goes from say -47 dBm with only one card installed to -95 with both installed. Each of the two wireless cards are setup for completely different frequencies (i.e. one at 4.9x GHz and the other at 5.8x Ghz). I have verified that they are both configured properly using iwconfig and ifconfig. The most baffling thing is that I would think that as long as one of them is disabled (i.e. down) that the other one would work just like it was the only one installed in the board but it doesn't. Any help would be greatly appreciated. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
