David Burke wrote: > I have a Soekris NET4526 board with two wireless (mini-pci) cards running a > stripped down version of RedHat Linux. The software that I am running was > written by another company so I am not terribly intimate with their > software. I will tell you that it is configured to operate as a router. > > My problem is that the board and software works fine when I have either of > the two wireless cards installed in the Soekris board by themselves, but as > soon as I install the other card such that both are installed > simultaneously, I can't get either of them to work. What I mean by this is > that the "Signal Level" reported by iwconfig goes from say -47 dBm with only > one card installed to -95 with both installed. Each of the two wireless > cards are setup for completely different frequencies (i.e. one at 4.9x GHz > and the other at 5.8x Ghz). > > I have verified that they are both configured properly using iwconfig and > ifconfig. The most baffling thing is that I would think that as long as one > of them is disabled (i.e. down) that the other one would work just like it > was the only one installed in the board but it doesn't. > > Any help would be greatly appreciated.
Are you sure you have a power supply that's able to drive both cards? What is it rated as? -Proto _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
