Fran Taylor wrote: > On Wed, 2008-05-07 at 12:00 +0000, > [EMAIL PROTECTED] wrote: > >> wctdm24xxp0: ERROR: Unable to service card within 30 ms and unable to >> further increase latency. > > Are you sure this is an IRQ conflict? When I have seen problems like > this, it is usually a hardware issue with the card. This is a > fascinating card, but it appears to use quite a bit of power. is the > auxiliary power connector attached? Can you use a voltmeter to check > the supply voltages on the card? See if you get different results with > the module boards unplugged. Have you plugged it into a standard PC to > see what happens there?
The aux power connector should only be required if FXS modules are used. If this card won't work for you, I can highly recommend the Rhino 8 port card. I have several of these in production on net5501's. I also have a net5501 with a Rhino 24 port card installed. I am using a 5a non-soekris supplied power supply (12v) to power the net5501. Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
