Le Sun, 22 Jun 2008 15:38:10 +0100, Martin Johnson <[EMAIL PROTECTED]> a écrit :
> - When the SATA drives are detected by combios, why doesn't the > FreeBSD 7.0p2 installer see them? Do I need to add something to the > GENERIC kernel? No, it should work out of the box. I've installed a 7.0 release and now i run 7-STABLE. Well, I don't have any problem on my net5501 with a WDC WD2500BEVS disk. ComBios 1.33 > - Are PATA/IDE drives more reliable than SATA drives on the net5501? The SATA is done by a chipset behind the ATA controller (the CS5536 companion chipset), so this is not a real SATA. I mean the OS only see the ATA controller. > Thanks for any pointers! > > - Martin. > > > ---------------- > Config. Info:- > ---------------- > SATA drives used: 1 x Hitachi Travelstar 5K160 160GB, 1 x > Samsung HM160JI 160GB. (one drive on each net5501.) > Cards used: none (no CF, no PCI, no miniPCI). > PSU used: 12 volt 5 amp Mascot unit. > Combios settings: > ConSpeed = 9600 > ConLock = Enabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Enabled > FLASH = Secondary > BootDelay = 5 > FastBoot = Disabled > BootPartition = Disabled > BootDrive = 80 FF FF FF > ShowPCI = Enabled > Reset = Hard > CpuSpeed = Default Same here. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
