Le Sun, 22 Jun 2008 17:55:32 +0100, Martin Johnson <[EMAIL PROTECTED]> a écrit :
Hello, > So, I guess I need to repeat this test on my other recent net5501, > and then again on my two older net5501's (which are running ATA > drives) to try to confirm that it is a manufacturing fault with the > last batch of net5501's. My box is two months old. > Do you know what firmware revision your WDC2500BEVS has? When my > drive is detected, the combios reports 'WDC WDC2500BEVS-00UST0'. It > would be interesting to see if we have the same drive firmware. It is the same drive. The ComBios reports : Pri Mas WDC WD2500BEVS-00UST0 LBA Xlt 1024-255-63 134 GByte (The drive is a 250 Gbyte but it does not seem to hurt.) # atacontrol cap ad0 Protocol Serial ATA v1.0 device model WDC WD2500BEVS-00UST0 serial number WD-WXC208956619 firmware revision 01.01A01 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 488397168 sectors dma supported overlap not supported Feature Support Enable Value Vendor write cache yes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management yes yes 128/0x80 automatic acoustic management yes no 254/0xFE 128/0x80 dmesg: atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] ad0: 238475MB <WDC WD2500BEVS-00UST0 01.01A01> at ata0-master UDMA100 Regards. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
