In message <[EMAIL PROTECTED]>, Massimiliano Cianelli writes : > I'v recently bought a Net5530, I'm trying to find how to command the 3 > led on the front of panel.
I pressume you mean a 5501 in a case :-) > To be more precise, I want to use the 3 led for indicate the status, > eg: > Power led -> Blink - System is online and is working (blink made via a > script that do echo 1\0 > /proc/blabla) The power-led is not controllable, it is directly wired to the power. > Error Led -> hum.. Internet connection down (ok it is just an example > :P) This one is hooked up to GPIO pin 6. > Disk Led -> Due that it don't look at the CF R\W, use it for.. an > example, show the traffic of the VPN interface. This is wired directly to the disk activity hardware pin. > Is possibile to make that? In sort: No. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
