On Fri, 2008-07-25 at 07:48 +0000, Poul-Henning Kamp wrote: > In message <[EMAIL PROTECTED]>, Massimiliano Cianelli writes > : > > > I'v recently bought a Net5530, I'm trying to find how to command the > > 3 led on the front of panel. > > I pressume you mean a 5501 in a case :-) > > > To be more precise, I want to use the 3 led for indicate the status, > > eg: > > Power led -> Blink - System is online and is working (blink made via > > a script that do echo 1\0 > /proc/blabla) > > The power-led is not controllable, it is directly wired to the power. > > > Error Led -> hum.. Internet connection down (ok it is just an > > example :P) > > This one is hooked up to GPIO pin 6. > > > Disk Led -> Due that it don't look at the CF R\W, use it for.. an > > example, show the traffic of the VPN interface. > > This is wired directly to the disk activity hardware pin. > > > Is possibile to make that? > > In sort: No. >
Of course you could rip the LEDs off the board and stick your own ones into the holes on the front of the case, if you don't think you need tham. That's my uneducated guess, at least (I wouldn't take going into discussion with Poul-Henning lightly on this topic;) . But then you might as well drill a couple of new holes.. Bill -- "There is nothing to worry about" - unknown _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
