At 03:28 AM 8/25/2008, Henrik Harms wrote:
>Hi,
>
>I have two net5501 (Bios 1.33) of which one works fine (as far as I
>can see) but the other does not even come up with the BIOS Post
>messages. I had it working before but after a reboot (where I had
>removed a USB2.0-CF reader) it will just light up power and red error-
>LEDs and sit there for ever. No activity on the serial port. It does
>not respond to the reset switch (BIOS Setting: Hard reset).
>
>I tried again 12 hours later after having it sit over night with no
>power connected and it worked on Friday. It went into the I-don't-do-
>no-nothing mode again on Friday afternoon, now it is Monday and it
>won't boot again.
>
>I'm using SanDisk Extreme III CF cards which work well in other devices.
>
>Question: Is there any way I can truly hard-reset the system?
>Question2: Is this the behavior menat by "periodic power up problems"
>in issue 0007?
I just got a batch of 6 and 2 of the 6 had this same problem :( The
bootup issue happens even if there is no flash in the machine, so I
dont think its a flash compatibility issue.
---Mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
