Although I haven't got the tdm 400 card working yet on my 4801, the external 
power connector only seems to connect the 5v line... which is the only one I've 
connected.

dunno if this is true / relevant.

Steve

On Wed, 12 Nov 2008 07:09:48 -0000
"Andrew Thomas" <[EMAIL PROTECTED]> wrote:

> Dave,
>  
> What does ztcfg -vvv display?
>  
> This could be more of a problem with ZapTel (assuming you are not using 
> dahdi) than your linux kernel.
>  
> Also, I suppose you realise that you will have trouble making analog handsets 
> ring - as the TDM cards require a 12v/5v input (as supplied by a PC power 
> supply - but not available on a soekris board)?
>  
> cheers
> Andy
> dCap
> 
> ________________________________
> 
> From: [EMAIL PROTECTED] on behalf of Felix Kronlage
> Sent: Tue 11/11/2008 22:47
> To: Dave Byrne
> Cc: [email protected]
> Subject: Re: [Soekris] net5501 irq conflicts (digium tdm410)
> 
> 
> 
> On Tue, Nov 11, 2008 at 12:53:51PM -0800, Dave Byrne wrote:
> 
> Hi Dave,
> 
> > 00:0e.0 Ethernet controller: Digium, Inc. Unknown device 8005 (rev 11)
> >         Subsystem: Digium, Inc. Unknown device 8005
> >         Flags: bus master, medium devsel, latency 64, IRQ 10
> >         I/O ports at e500 [size=256]
> >         Memory at a0004400 (32-bit, non-prefetchable) [size=1K]
> >         Expansion ROM at 98000000 [disabled] [size=128K]
> >         Capabilities: [c0] Power Management version 2
> 
> looks a bit different here, still irq 10, but I could successfully
> load the modules for it:
> 
> | 00:0e.0 Ethernet controller: Digium, Inc. Device 8005 (rev 11)
> |        Subsystem: Digium, Inc. Device 8005
> |        Flags: bus master, medium devsel, latency 64, IRQ 10
> |        I/O ports at e500 [size=256]
> |        Memory at a0004400 (32-bit, non-prefetchable) [size=1K]
> |        Expansion ROM at 98000000 [disabled] [size=128K]
> |        Capabilities: [c0] Power Management version 2
> |        Kernel driver in use: wctdm24xxp
> |        Kernel modules: wctdm24xxp
> 
> and it receives interrupts here:
> 
> | sip:~# cat /proc/interrupts
> |           CPU0      
> |  0:   89318583    XT-PIC-XT        timer
> |  1:          0    XT-PIC-XT        i8042
> |  2:          0    XT-PIC-XT        cascade
> |  4:        325    XT-PIC-XT        serial
> |  8:          0    XT-PIC-XT        rtc0
> | 10:  357274318    XT-PIC-XT        wctdm24xxp0
> | 11:    2680908    XT-PIC-XT        eth0
> | 14:      76901    XT-PIC-XT        ide0
> | 15:          1    XT-PIC-XT        ohci_hcd:usb1, ehci_hcd:usb2
> |NMI:          0   Non-maskable interrupts
> |LOC:          0   Local timer interrupts
> |TRM:          0   Thermal event interrupts
> |SPU:          0   Spurious interrupts
> |ERR:          0
> |MIS:          0
> 
> this is a 5501-70 with 1.33c, running:
> 
> | sip:~# uname -a
> | Linux sip 2.6.26-1-486 #1 Thu Oct 9 14:22:52 UTC 2008 i586 GNU/Linux
> 
> felix
> --
> 
> bytemine  -  Entwicklungsmanufaktur fuer innovative Loesungen
> Geschaeftsfuehrer:  Felix Kronlage   -  [EMAIL PROTECTED]
> Tel: (+49)(0)441 - 36116410
> Fax: (+49)(0)441 - 36116419
> http://www.bytemine.net/ - [EMAIL PROTECTED]
> 
> Kommunikation gerne mit GPG/PGP: 0xD9AC74D0
> 
> Neuigkeiten aus der Datenmine:  http://blog.bytemine.net/
> 
> 
> 


-- 
Steve Holdoway <[EMAIL PROTECTED]>
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to