EDIT: Sorry, that's only the 12V is connected, not 5V! On Wed, 12 Nov 2008 21:32:54 +1300 Steve Holdoway <[EMAIL PROTECTED]> wrote:
> Although I haven't got the tdm 400 card working yet on my 4801, the external > power connector only seems to connect the 5v line... which is the only one > I've connected. > > dunno if this is true / relevant. > > Steve > > On Wed, 12 Nov 2008 07:09:48 -0000 > "Andrew Thomas" <[EMAIL PROTECTED]> wrote: > > > Dave, > > > > What does ztcfg -vvv display? > > > > This could be more of a problem with ZapTel (assuming you are not using > > dahdi) than your linux kernel. > > > > Also, I suppose you realise that you will have trouble making analog > > handsets ring - as the TDM cards require a 12v/5v input (as supplied by a > > PC power supply - but not available on a soekris board)? > > > > cheers > > Andy > > dCap > > > > ________________________________ > > > > From: [EMAIL PROTECTED] on behalf of Felix Kronlage > > Sent: Tue 11/11/2008 22:47 > > To: Dave Byrne > > Cc: [email protected] > > Subject: Re: [Soekris] net5501 irq conflicts (digium tdm410) > > > > > > > > On Tue, Nov 11, 2008 at 12:53:51PM -0800, Dave Byrne wrote: > > > > Hi Dave, > > > > > 00:0e.0 Ethernet controller: Digium, Inc. Unknown device 8005 (rev 11) > > > Subsystem: Digium, Inc. Unknown device 8005 > > > Flags: bus master, medium devsel, latency 64, IRQ 10 > > > I/O ports at e500 [size=256] > > > Memory at a0004400 (32-bit, non-prefetchable) [size=1K] > > > Expansion ROM at 98000000 [disabled] [size=128K] > > > Capabilities: [c0] Power Management version 2 > > > > looks a bit different here, still irq 10, but I could successfully > > load the modules for it: > > > > | 00:0e.0 Ethernet controller: Digium, Inc. Device 8005 (rev 11) > > | Subsystem: Digium, Inc. Device 8005 > > | Flags: bus master, medium devsel, latency 64, IRQ 10 > > | I/O ports at e500 [size=256] > > | Memory at a0004400 (32-bit, non-prefetchable) [size=1K] > > | Expansion ROM at 98000000 [disabled] [size=128K] > > | Capabilities: [c0] Power Management version 2 > > | Kernel driver in use: wctdm24xxp > > | Kernel modules: wctdm24xxp > > > > and it receives interrupts here: > > > > | sip:~# cat /proc/interrupts > > | CPU0 > > | 0: 89318583 XT-PIC-XT timer > > | 1: 0 XT-PIC-XT i8042 > > | 2: 0 XT-PIC-XT cascade > > | 4: 325 XT-PIC-XT serial > > | 8: 0 XT-PIC-XT rtc0 > > | 10: 357274318 XT-PIC-XT wctdm24xxp0 > > | 11: 2680908 XT-PIC-XT eth0 > > | 14: 76901 XT-PIC-XT ide0 > > | 15: 1 XT-PIC-XT ohci_hcd:usb1, ehci_hcd:usb2 > > |NMI: 0 Non-maskable interrupts > > |LOC: 0 Local timer interrupts > > |TRM: 0 Thermal event interrupts > > |SPU: 0 Spurious interrupts > > |ERR: 0 > > |MIS: 0 > > > > this is a 5501-70 with 1.33c, running: > > > > | sip:~# uname -a > > | Linux sip 2.6.26-1-486 #1 Thu Oct 9 14:22:52 UTC 2008 i586 GNU/Linux > > > > felix > > -- > > > > bytemine - Entwicklungsmanufaktur fuer innovative Loesungen > > Geschaeftsfuehrer: Felix Kronlage - [EMAIL PROTECTED] > > Tel: (+49)(0)441 - 36116410 > > Fax: (+49)(0)441 - 36116419 > > http://www.bytemine.net/ - [EMAIL PROTECTED] > > > > Kommunikation gerne mit GPG/PGP: 0xD9AC74D0 > > > > Neuigkeiten aus der Datenmine: http://blog.bytemine.net/ > > > > > > > > > -- > Steve Holdoway <[EMAIL PROTECTED]> > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech -- Steve Holdoway <[EMAIL PROTECTED]> _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
