Hi, I have a 5501 board with a PCI board containing a Via USB controller (it is actually a Hauppauge Nova T500 DVB board with two Dibcom USB tuners and a Via vt6212l USB controller). I have installed Debian via PXE and everything works fine until I install the PCI board. With the board plugged I get tons of kernel errors like: usb 3-1: device descriptor read/64, error -110 uhci_hcd 0000:00:0e.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ
(usb 3-1 is the EHCI USB2 device corresponding to the board hub) The board is assigned IRQ10. The issue looks a bit similar to a previous posting regarding problems with a Digium TDM board. As a probable side effect of PCI / IRQ routing misconfiguration, if I plug in the board eth0 no longer works, but eth1 does work. I have tried booting with irqfixup, irqpoll, all sorts of ACPI flags (is there ACPI support at all in the board?) without success. Can someone help? Thank in advance, _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
