Hi Steve, Yes, it does work after power-cycling the unit. I believe the same functionality is achieved as using the CF-to-IDE adapter, but without the adapter.
Tamas Steve Clark wrote: > Tamas Vincze wrote: >> Hi, >> >> I have Transcend 266x CF card that didn't work with the net5501 >> as I e-mailed the list about a month ago. >> >> I purchased a CF-to-IDE adapter and with that the same CF card worked! >> Here came the idea: the adapter had a Master/Slave jumper, why not >> hack one onto the net5501? I tried it and it worked! >> >> I cut the -CSEL wire on the back of the CF slot making the card >> work as Slave regardless of the "flash" setting in comBIOS (v1.33c). >> The CF card is detected by comBIOS, Grub boots and Linux sees it as hdb. >> I tried grounding -CSEL to make it Master but it didn't work. >> >> Here are the details and a pic: >> http://www.vincze.org/hw/soekris/ >> >> Tamas >> _______________________________________________ >> Soekris-tech mailing list >> [email protected] >> http://lists.soekris.com/mailman/listinfo/soekris-tech >> > Does this also work from a cold power on? _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
