Set this up: set ConMute=Enabled
> I, > > hardware : net5501 BIOS:b5501_133c. > > I've just installed debian lenny on my net5501 with a 2Go sandisk CF > plugged into it (pxeboot etc...). The boot loader is grub. No pb > during installation. > > The only pb I have is that I can only start my new debian with > >> boot 80 > > Is it not possible to boot automatically (I mean : without any > intervention from me) ? > > Lot of thanks for any clue. > > PS : > I tried many combination with Flash=primary/secondary, bootdrive=80/81 > pxeboot=enabled/disabled with no result... > > Now I have : >> show > > ConSpeed = 9600 > ConLock = Enabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Disabled > FLASH = Primary > BootDelay = 5 > FastBoot = Disabled > BootPartition = 1 > BootDrive = 80 81 F0 FF > ShowPCI = Enabled > Reset = Hard > CpuSpeed = Default > > -- > Philippe Monroux > E 55.3 S 21.5 > http://zygomaths.pagespro-orange.fr/index.html > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
