I,
hardware : net5501 BIOS:b5501_133c.
I've just installed debian lenny on my net5501 with a 2Go sandisk CF
plugged into it (pxeboot etc...). The boot loader is grub. No pb
during installation.
The only pb I have is that I can only start my new debian with
> boot 80
Is it not possible to boot automatically (I mean : without any
intervention from me) ?
Lot of thanks for any clue.
PS :
I tried many combination with Flash=primary/secondary, bootdrive=80/81
pxeboot=enabled/disabled with no result...
Now I have :
> show
ConSpeed = 9600
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Disabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = 1
BootDrive = 80 81 F0 FF
ShowPCI = Enabled
Reset = Hard
CpuSpeed = Default
--
Philippe Monroux
E 55.3 S 21.5
http://zygomaths.pagespro-orange.fr/index.html
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
