Hi Max,

On Thu, 2009-07-09 at 22:02 -0800, Max Lou wrote:
> Hello,
> 
> I have a net5501 I just finished building a fresh 2.6.29 kernel and
> configured serial output via lilo.conf:
> 
> serial=0,19200n8
> append="console=tty0 console=ttyS0,19200"
> 
> 
> Two problems: One, once the kernel loads the characters seem to be
> printing twice (the soekris combios displays fine, it is only when the
> kernel loads that the problem exists).
> 
See
http://lists.soekris.com/pipermail/soekris-tech/2002-February/000036.html

[...]

> 
> Then I get a bunch of messages which do not occur when booting off the
> CF card on a regular desktop system (see below)
> Does anyone know what this means? I tried googling, but there is so
> much displayed here I dont even know where to start.
> 

To me this looks like the regular kernel output, possibly a bit more
verbose than what you would see on your desktop system (which may hide
the kernel output behind a splash screen altogether).

Bill

> ________________________________________________________________________
> 
> [    0.000000] Linux version 2.6.29 (root@(none)) (gcc version 4.3.2
> (CRUX)
> (GCC                                                              
> 
> POST: 012345689b
          ^^^
A copy/paste thing I assume?

> ) ) #1 SMP Thu Jul 9 21:35:50 UTC
> 2009                                   
> 
> 
> 
> [    0.000000] KERNEL supported cpus:yright (C) 2000-2008 Soekris
> Engineer
> [    0.000000]   Intel GenuineIntel                                   
> [    0.000000]   AMD AuthenticAMDt 995-128-63  4013 Mbyte       CP
> [    0.000000]   NSC Geode by NSC                                 
> [    0.000000]   Cyrix CyrixInsteadRev Cmd  Stat CL LT HT  Base1    Ba
> [    0.000000]   Centaur
> CentaurHauls                                     
> [    0.000000]   Transmeta
> GenuineTMx86----------------------------           
> [    0.000000]   Transmeta TransmetaCPU                
> 0:01:2 1022 2082 10100
> [    0.000000]   UMC UMC UMC UMC0000000 10                      
> [    0.000000] PAT not supported by CPU.  
> 0:06:0 1106 3053 02000096 0117 0210 0
> [    0.000000] BIOS-provided                           
> 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 0000000
> [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000
> (reserved)2 2094 0C031002 0006 0230 08 00 80 A0005000 00000000
> 15                  
> [    0.000000] DMI not present or invalid.    
> 0:21:1 1022 2095 0C032002 0006 0230 0
> [    0.000000] last_pfn = 0x20000 max_arch_pfn =
> 0x100000                                   
> 
>  1 Seconds to automa
        ^^^
       Same...

[...]

> _______________________________________________
> Soekris-tech mailing list
> [email protected]
> http://lists.soekris.com/mailman/listinfo/soekris-tech

_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to