Marco A. Calamari wrote at 2009-12-25 11:53 -0600: > On Thu, 2009-12-24 at 20:09 -0600, Owen Heisler wrote: > > Martin Johnson wrote at 2009-12-24 19:09 -0600: > > > 1. Can you use both CF + HDD, if you set FLASH = Secondary in the > > > ComBIOS? > > > > Yes, that seems to work. > > > > > 2. I suspect 134 GByte is not a real capacity limit, just a limitation of > > > the > > > initial power-on scan. One of my 5501's uses a 1TB WD 3.5" disk: this is > > > shown at power-on as 134 GB, but FreeBSD can use the whole 1 TB with no > > > problem. This is with ComBIOS 1.33 (20070103). BTW, I didn't have to > > > jumper > > > the drive down to SATA-150, but perhaps different drives have different > > > timing characteristics. > > > > With this Seagate, the jumper still seems to be required to keep the BIOS > > from > > hanging for a while on boot. > > My 5501 setting works flawlessy with CF as hda (boot) and a SATA > Seagate 160 as hdb. The only trick in to jumper "cable select" > the HDU.
The only documented jumper for this SATA Seagate is the SATA-150 speed limit.
signature.asc
Description: Digital signature
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
