In message <[email protected]>, Henrik /KaarPoSoft writes: >Thank you for the link, Alexander! > >But: Are the sensors wired and scaled the same way in net5501 and net4801?
almost. >Most voltage readings seem OK, but I wonder about >Volt 6 GND 222 2.624 V scale 1.0 2.624 V +/- 0.0118 V > >How can the ground level be 2.62 volts? no, can't remember what that one is though. >After leaving the net5501 powered-off for 7 hours, running env4801 >immediatley after boot gives: >Temp 2 (status=0x81) 38 C This chip is measured on the chip by an embedded diode, so yes, this is very likely. >During a three hour kernel compilation, the temperature seems keep >stable at 49-52 deg C. >Does it seem reasonable that such a mis-use does not lead to increased >temperature? Yes, that's very reasonable. Start worrying around 70-80C. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [email protected] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
