Hi, Has anyone successfully used an Openvox A400P11 card with a NET5501? I'd like to try this with AskoziaPBX.
The A400P card is a similar to Digium's TDM410, but roughly half the cost. The A400P11 bundle comes with 1 FXO module and 1 FXS module. During calls, the A400P11 needs about 4 watts of power at 12V via a 4-pin Molex (3.5" HDD-style) connector. Can that power be drawn from JP10 pin 3 on the NET5501, if I supply 12V into J5? Am I correct in assuming that the centre pin of J5 is wired to pin 3 on JP10? Thanks for any pointers! - Martin _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
